Management tab, 4management tab – Brother QL-810W Ultra-Fast Label Printer with Wireless Networking User Manual
Page 67
Changing the Label Printer Settings
57
4
Management Tab
4
The following explains about the Management Tab in the settings dialog box.
Important
To display these tabs, you must have administrator privileges for the computer or the printer.
You can confirm the administrator privileges for the printer in the [
Printer properties
] - [
Security
] tab.
• Command Mode
Selects the type of command mode.
Available settings: [
Raster
], [
ESC/P
], [
P-touch Template
]
• Airplane Mode
Allows disabling the Bluetooth or Wi-Fi interfaces. This function is useful when you use the Label Printer
in a place where signal transmissions are not allowed. The following conditions apply:
QL-810W: Pressing and holding the Wi-Fi ( ) Button and WPS Button will be ineffective.
QL-820NWB: [
WLAN
] and [
Bluetooth
] menu will disappear from the LCD.
Available settings: [
Off
], [
On
]
• Lock Settings (QL-820NWB only)
Locks the menu settings so that they cannot be changed.
Mark the settings to be locked using the [
Select
] button.
• Admin Password (QL-820NWB only)
Selects On to configure administrator mode. Set a 4-digit password that must be used in order to change
the menu settings.
Available settings: [
Off
], [
On
]
• Unit (QL-820NWB only)
Specifies the default unit.
Available settings: [
inch
], [
mm
]
• Language (QL-820NWB only)
Selects the language of the LCD.
• Date Format (QL-820NWB only)
Selects the date format for the clock.
• Time Format (QL-820NWB only)
Selects the time format for the clock.