Electro-Voice Microphone - Manual (Page 72)

72
Professional Wireless Microphones
Transmitter Features
• Unique “smart” battery circuit in the transmitters means there is
no way to put the battery in wrong.
• LCD display and the same four control buttons as the receiver so
programming a channel or frequency is quick and easy.
• Low battery LED lights when the battery needs a replacement.
• One on/off switch that also acts as a mute (great for pauses in
presentations and worship services).
• On/off button can be disabled to prevent accidental turnoffs
during a performance.
• Normal and High power transmit means you use just enough
power for the application, which maximizes the number of
simultaneous systems and limits RF spill over into adjacent
buildings/theaters.
Handheld Features
• Interchangeable microphone head allows a choice of elements
to fit the vocalist’s style and environment.
• N/DYM® 767a premium dynamic vocal microphone with
VOB™ (Vocal-Optimized Bass), excellent gain-before-feedback
for high SPL stages.
• The new RE510 premium condenser vocal microphone for expe-
rienced vocalists, spoken word and quieter stages.
• Internal 1/2-wave antenna for excellent range; stays out of
harm’s way.
• An over-molded Warm-Grip™ handle reduces handling noise
and encourages proper microphone technique for better per-
formances.
Receiver
Transmitter
• Optimized channel groups allow up to 16 systems to operate
simultaneously in one frequency band. For groups larger than
16, EV can help with the coordination and custom groups are
easily programmed.
• Programmable in 25 kHz steps across 24 MHz operating band-
width, there are over 950 possible channels so you can always
find a clear channel.
• Advanced ClearScan™, automatic group and channel selections,
allows quick, simple setup.
• Backlit LCD Display shows the Sound Engineer the Group/
Channel, transmitter battery status, diversity operation, RF and
Audio level meters, and space for a custom name (2 lines, 10
characters each).
• Specially designed “Sound Check” mode provides the ability for
one person to walk-test the microphone in the performance
space with tangible results.
• Patented DSP Secure-Phase™ Diversity System for maximum
range and audio quality.
• Balanced XLR microphone output and 1/4-inch unbalanced
adjustable line-level output to match the application.
• CDR-1000 Dual Receiver includes internal power supply, head-
phone monitoring jack, balanced line-level output, antenna pass
through, DC power on antenna jacks for optional RF amplifier, and
RE-OneLink™ PC software for remote monitoring and control.
• Rackmount hardware included.
• Three-Year Limited Warranty.