Electro-Voice Microphone - Manual (Page 14)

14
FRX-122
• Two-way, full-range loudspeaker
• Vented LF enclosure
• 2" voice coil (titanium diaphragm)
• PRO™ Driver protection circuit
• Time Path™ phasing plug
• Asymmetric horn aims 40° downward
relative to front baffle
• Rectangular cabinet
• Extra-flat profile design useful also for
cinema surround applications
• Twelve 1/4"-20 suspension points
Horn aims 40° downward
FRX-122 horn aiming
FRX+ & FRX+PI-Systems
FRX+ Series loudspeakers are designed for applications in
critical reverberant spaces where excellent directivity control
is mandatory. Typical small-sized speaker systems are not
able to maintain their rated coverage angles below 2000 Hz.
Their wide beamwidth in the low midband is accompanied
by serious degradation of speech intelligibility and clarity of
music signals in such hostile environments.
EV´s FRX+ systems are troubleshooters concerning these
problems, providing excellent wideband directivity control.
The all-horn-loaded, coaxial design comes up with sufficient radiation surface to enable narrow coverage angles down to
250 Hz at moderate cabinet sizes.
FRX+ 640/660/940 cabinets are texture-painted, 7-ply ply-
wood with powder-coated steel grille backed with foam.
FRX-122 has a cloth-covered grille.
For outdoor purposes, FRX+640/660/940 PI models are
equipped with weatherized woofers, powder-coated stain-
less-steel grilles backed with multilayer foam and covered
glandnut input panels.