Electro-Voice Microphone - Manual (Page 15)

FRX+640
(60° x 40°)
FRX+660
(60° x 60°)
FRX+940
(90° x 40°)
• Two-way, high-output, full-range loudspeaker
• High sensitivity: 101 dB/1W/1m (passive); 109 HF/105 LF
• Coaxial horn-loaded
• Vented LF horn enclosure
• 2" voice coil (titanium diaphragm)
• Trapezoidal cabinet (15° per side)
• L-Track hardware (top/bottom)
• Two single-stud Ancra ® fittings included
• 3/8"-16 suspension point (rear)
• Same dimensions as FRX-181
for uniform array appearance
• PRO™ Driver protection circuit
• Time Path™ phasing plug
• Directivity to 500 Hz
• DX38 presets for excellent directivity control
15
FRX-122 FRX+640 FRX+660 FRX+940 FRX+181
Frequency range (-3 dB) 75 Hz–20 kHz 50 Hz–20 kHz 50 Hz–20 kHz 50 Hz–20 kHz 43 Hz–1,000 Hz
Recommended high-pass frequency — — — — 35 Hz (12 dB/Oct.)
Sensitivity (SPL 1 W/1 m) 99 dB 105 dB 105 dB 105 dB 96 dB
Max. SPL/1m (calc.) 130 dB 133 dB 133 dB 133 dB 128 dB
Long-term power handling (biamped) 300 W (300 W/60 W) 400 W (400 W/60 W) 400 W (400 W/60 W) 400 W (400 W/60 W) 400 W
Short-term power handling 1,200 W 1,600 W 1,600 W 1,600 W 1,600 W
Coverage (H° x V°) 110° x 55° 60° x 40° 60° x 60° 90° x 40° omni
(asym. CD Horn)
Directivity Index 10.4 dB (+2.3/-1.6 dB) 14.1 dB (+1.9/-3.5 dB) 13.7 dB (+2.5/3.3 dB) 13.4 dB (+2.9/-3.2 dB) 3.8 dB
800 Hz–16 kHz 500 Hz–16 kHz 500 Hz–16 kHz 500 Hz–16 kHz 50 Hz–200 Hz
LF driver 12" (DL12BFH) 15" (DL15) 15" (DL15) 15" (DL15) 18" (DL18MT)
HF driver 1" (DH2T) 1" (DH2T) 1" (DH2T) 1" (DH2T) —
Crossover frequencies (passive mode) 1,800 Hz 1,800 Hz 1,800 Hz 1,800 Hz —
Nominal impedance (biamped) 8 Ω (8 Ω /8 Ω ) 8 Ω (8 Ω /8 Ω ) 8 Ω (8 Ω /8 Ω ) 8 Ω (8 Ω /8 Ω ) 8 Ω
Input connections Neutrik ® /barrier strips Dual barrier strips Dual barrier strips Dual barrier strips Dual barrier strips
Dimensions (H x W at front x D) 584 x 451 x 229 mm 787 x 719 x 660 mm 787 x 719 x 660 mm 787 x 719 x 660 mm 787 x 719 x 660 mm
23" x 17.8" x 9" 31" x 28.3" 26" 31" x 28.3" 26" 31" x 28.3" 26" 31" x 28.3" 26"
Net weight 20.9 kg (49 lbs.) 68.95 kg (152 lbs.) 68.95 kg (152 lbs.) 68.95 kg (152 lbs.) 45.5 kg (105 lbs.)
FRX+181
• Subwoofer
• Direct-radiating vented design
• Trapezoidal cabinet (15° per side)
• L-Track hardware (top/bottom)
• Four single-stud Ancra ® fittings included
• 3/8"-16 suspension point (rear)
• Same dimensions as FRX-640/660/940
for uniform array appearance
• Solid response to 35 Hz (-10 dB)
• Maximum crossover point of 800 Hz allows
combinations with HP horns.
• Coverage angles are greater than
100° x 100° at 800 Hz
FRX+ & FRX+PI-Systems
Available as
weather-
resistant
PI-Version