Electro-Voice Microphone - Manual (Page 19)

19
QRx Series
Not even three years on the market, EV’s QRx Series loud-
speakers have become the go-to systems for contractors,
regional sound companies, and anyone who wants to step
up to high-end pro audio without blowing the budget. With
integated L-track rigging points on top and bottom, the QRx
cabinets are easy to fly. The unique, asymmetrical, fully
rotatable horn provides a 15-degree down angle to ensure HF coverage where needed, while avoiding acoustic spill.
EV’s powerhouse DH7 large-format driver (3” voicecoil,
1.4” exit) provides the HF engine, while a selection of EV’s
DL and EVX woofers anchor the LF and sub frequencies. EV’s
combination of high-level components and unique design
make the QRx Series one of the best and most versatile
values in the industry.
QRx 112/75
• 2-Way High-Output Full-range
• High Sensitivity
• Ultra-linear frequency response
• Solid bass down to 52 Hz (-10 dB)
• Vented LF enclosure
• Asymmetric CD-horn aimed downward by 10°
• 3.1” voice coil (titanium diaphragm)
• Protection circuits for HF-driver and LF-woofer
• Easy external operation mode selection
• 5-side multi-angled housing with monitor slant
QRx 115/75
• 2-Way High-Output Full-range
• High Sensitivity
• Ultra-linear frequency response
• Solid bass down to 50 Hz (-10 dB)
• Vented LF enclosure
• Asymmetric CD-horn aimed downward by 10°
• 3.1” voice coil (titanium diaphragm)
• Protection circuits for HF-driver and LF-woofer
• Easy external operation mode selection
• 5-side multi-angled housing with monitor slant
• Same front width as QRx 118 S
QRx 212/75 / QRx 2121H/75
• 2-Way Highest-Output Full-range
• High Sensitivity
• Ultra-linear frequency response
• Extended bass response down to 50 Hz (-10 dB)
• Vented LF enclosure
• Asymmetric CD-horn aimed downward by 10°
• 3.1” voice coil (titanium diaphragm)
• Protection circuits for HF-driver and LF-woofers
• Easy external operation mode selection
• Trapezoidal (10° per side)
QRx as monitor
Easy operation
mode selection