Electro-Voice Microphone - Manual (Page 12)

12
FRi / FRi+ Series
FRi Series brings premium EV components, including the
DH2T compression driver and DL series woofers, to a new
level of affordability. The FRi Series provides exceptional
value where flexibility and performance is required in per-
manent installations. Suspension is achieved by using the
numerous threaded mounting points. These allow flexible
installation in any situation. FRi systems are finished in black acrylic with 13-ply birch
plywood and have a black powder-coated metal grille.
Designed from the ground up for safe, attractive installa-
tions, FRi-122/64 and FRi-152/64 have the same 28-inch
(711 mm) height as FRi-181S for uniform array appearance.
FRi+ adds the performance of the large-format DH7 driver
and the choice of more coverage pattern.
FRi-2082/28LPM
• 2-Way Full-range
• Vented LF enclosure
• 1” voice coil (titanium diaphragm)
• Low-profile slanted design
• 45° angle allows underbalcony,
on-wall and stage monitoring applications
• Only FRi-2082 comes with mounting bracket!
• 2 x 3/8”-16 suspension points
FRi-122/64/85
• 2-Way Full-range
• Vented LF enclosure
• 2” voice coil (titanium
diaphragm)
• Trapezoidal
(15° per side)
• Comes with 4 eyebolts
• 12 x 3/8”-16
suspension points
• Hornnot rotatable in 85
version
Input-panel of a
FRi-152/64
356 mm
222 mm
FRi+122/64/66/94
• Two-way full-range
loudspeaker
• Switchable between
full range and biamp
• Vented LF enclosure
• 3” voice coil (titanium
diaphragm)
• Trapezoidal cabinet
(15° per side)
• Comes with four eye
bolts
• Twelve 3/8”-16
suspension points