Electro-Voice Co7 - Manual

C O B A L T ™
W I R E D
MICROPHONES
General Product Description
The Co7 is the perfect choice for the performer who wants
hassle free sound – a mic that performs in high volume
situations without feedback. Built to the same standards of
EV’s N/DYM microphones, this mic’s low handling noise
also makes it ideal in critical acoustic settings.
Microphone Use and Placement
Please note that miking techniques are a matter of personal
preference. These are merely guidelines to assist in the
placement of the microphone to gain optimal performance.
Usage Optimal Placement
Vocals Zero to six inches from the windscreen,
and on axis with the microphone.
Spoken Word Five to ten inches from the windscreen,
and on axis with microphone
Standard Placement & Use Guidelines
1. Always point the microphone at the desired source of
sound, and away from any unwanted sources.
2.The microphone should be located close to the sound
source to minimize interference from other potential
sound sources.
3. Use the 3-to-1 rule when using multiple microphones.
Place each microphone three times farther from other
microphones as from the desired sound source.
4. Minimize over-handling of the microphone to reduce
unwanted mechanical noise.
5.Working close to the microphone will increase the bass
tone and also provide increased gain-before-feedback.
Cobalt ™ Co
7
Crossroads Vocal Microphone