Electro-Voice Microphone - Manual (Page 48)

48
Components
Compression Drivers
Electro-Voice is one of a handful of professional audio com-
panies that can design high-performance compression driv-
ers. Compression drivers are the most difficult audio trans-
ducers to design. Their unique requirements call for
ultraprecise tolerances, state-of-the-art modeling routines,
and exceptionally talented engineering expertise. Manufac- turing techniques are frequently pushed to process limits,
and materials are formed and stabilized with cutting-edge
systems and controls. Each EV compression driver’s parame-
ters are tightly controlled to ensure world-class performance,
thus putting the drivers at the top of their class in every
respect.
Horn Adaptors from 1.4” bolt-on to 2” bolt-on ADH6
from 1” screw-on to 2” bolt-on ADH5
from 1” screw-on to 1.4” bolt-on ADH3
DH7-8/DH7-16
• Large-format ceramic
compression driver
• 300-watt power rating
• 3" titanium diaphragm
• 1.4" or 2" exit diameter for
use on almost any high-
performance horn
• Excellent for use with direct-
radiator or horn-loaded LF
and MB sections
ND6-8/ND6-16/ND6X
• Large-format neodymium
compression driver
• 300-watt power rating
• 3" titanium diaphragm
• 1.4" or 2" exit diameter for
use on almost any HP horn
• EV’s highest-performance
compression driver gives
world-class performance in
any application
• ND6X from > 500Hz
DH2T
• One-inch exit screw-on,
medium-format compression
driver
• 160-watt power rating
• 2" titanium diaphragm
• High performance on a
wide variety of thread-on
horn designs
DH3/DH2010A
• One-inch exit screw-on,
small-format compression driver
• 80-watt power rating
• 1.25" titanium diaphragm
• Excellent extended-bandwidth
HF driver for multi-way
loudspeaker systems
DH7-8/DH7-16 ND6-8/ND6-16 DH2T DH3/DH2010A
Frequency response 1,000 Hz–20 kHz 1,000 Hz–20 kHz / 500Hz-16kHz (ND6X) 1,200 Hz–20 kHz 1,500 Hz–20 kHz
Crossover frequency (minimum) 1,000 Hz 1,000 Hz 1,200 Hz 1,500 Hz
Midband sensitivity* 111 dB 112 dB 112 dB 111 dB
Long-term power rating (AES) 75 W 75 W 40 W 20 W
Short-term power rating 300 W 300 W 160 W 80 W
Impedance 8/16 Ohms 8/16 Ohms 8 Ohms 8 Ohms
Throat diameter 35 mm adaptor (1.4"/2.0") 35 mm adaptor (1.4"/2.0") 25 mm () 1.0" (25 mm)
Diaphragm diameter 76 mm (3.0") 76 mm (3.0") 50 mm (2.0") 32 mm (1.25")
Overall diameter 165 mm (6.5") 132 mm (5.2") 132 mm (5.2") 107 mm (4.5")
Overall depth 69 mm (2.7") 69 mm (2.7") 89 mm (3.5") 89 mm (3.5")
Net weight 4.54 kg (10.0 lbs) 2.5 kg (5.5 lbs) 2.27 kg (5.0 lbs) 1.5 kg (3.4 lbs)
*Average from 1,000 Hz–5 kHz on HP6040 horn (DH3 average from 1,500 Hz–5 kHz on HPT64 horn)