Electro-Voice TX1181 - Manual

TX1181
Single 18”
Direct-Radiating
Subwoofer
General Description: Technical Specifications:
Key Features:
EVS-18S 18” (457mm) LF Transducer •
100 dB Sensitivity, 132 dB Maximum SPL •
Integrated Low Pass Filter with 6 dB/Octave •
Slope
500W Continuous (2000W Peak) Power
•
Handling
Pole Mount to Elevate a Two-Way
•
Loudspeaker
Mounting Points to Attach Optional TX-W1
•
Wheel Kit
The Electro-Voice® TX1181 is a high power subwoofer that can be
used to extend the low frequency performance of the TX1122 and
TX1152 loudspeaker systems.
The TX1181 uses the EVS-18S, a high excursion 18” woofer, coupled
to well braced enclosure with large, low distortion ports, to add high
impact bass response to any fullrange loudspeaker. An integrated
low pass filter allows the TX1181 to be connected in parallel with
a TX1122 or TX1152 on a single amplifier channel, eliminating the
need for additional amplifier channels and processing.
The TX1181 has many features that make it a versatile subwoofer
system. The enclosure is constructed out of a combination of MDF
and plywood, and coated with EVCoat
TM for maximum strength and
durability. The unique grille design is very strong, dent resistant, and
features a rotatable logo. Four way handles allow for gripping the
TX1181 in a variety of positions. The recessed input panel with dual
NL4 connectors keeps the connectors hidden and allows for closer
placement to a wall or other boundary. An integrated pole mount
allows for elevating a TX1122 or TX1152, and integrated mounting
points on the rear of the enclosure allow the optional TX-W1 wheel
kit to be attached for easy portability.
Freq. Response 1 (-3 dB): 50 Hz - 160 Hz
Freq. Range 1 (-10 dB): 45 Hz - 700 Hz
Rec. Hipass Frequency: 30 Hz
Axial Sensitivity 1 : 100 dB (1W/1m)
Max. Calculated SPL 1 : 132 dB
Horizontal Coverage: Omnidirectional
Vertical Coverage: Omnidirectional
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: EVS-18S, 18 in (457mm) Driver
Nominal Impedance: 8 Ohms
Minimum Impedance: 7.5 Ohms
Connectors: (2) Neutrik Speakon NL4’s
Enclosure Material: Plywood and MDF with EVCoat TM
Grille: 16 GA Steel, Black Powdercoat, with
Rotatable Logo
Dimensions (H x W x D): 30.3” x 20.0” x 23.3”
(769mm x 508mm x 591mm)
Net Weight: 74.5 lbs (33.8 kg)
Shipping Weight: 88.0 lbs (40.0 kg)
1 Half Space Measurement.