Electro-Voice Microphone - Manual (Page 18)

18
PLASMA P1 & P2
PLASMA™ P1 Plasma P1's compact, ergonomically
designed enclosure houses an EVX155RMD, Kevlar™-rein-
forced 15” LF transducer driven by a 4” voicecoil for well-
defined transients and articulate vocals at all SPLs. The EV
ND-6 neodymium HF compression driver with a 3” voicecoil
coupled to an EV 80° x 55° horn provides extended HF
response with very low distortion. A two-channel class-H
amplifier provides a total of 700 watts of power but requires
NO fan, permitting quiet operation, low maintenance, and
long-term reliability. Coupled with signal processing for lin-
ear acoustic response, Plasma P1 delivers dynamic linearity
to very high SPLs. Equipped with three L-track attachment
points, Plasma can also be used with its proprietary PSA-V™
(Plasma Strong-Arm-Mount-Vertical) mounting system for
easy flying and precise aiming. The multi-angle enclosure is
available in left and right versions, thus allowing a 55° mon-
itor angle onstage and mirror-image monitoring.
PLASMA™ P2 Plasma P2 represents a new generation of
high-powered compact subwoofers. Designed to extend the
very low frequency response of Plasma P1, it uses a class
H-design amplifier driving an EVX180B 18” woofer. The
patented LPN™ (Low-Pass-Notch) filter compensates for
transient distortion in dynamic signals (such as kickdrums) to
achieve a higher acoustic output and more punch than
expected from such a compact enclosure.
PLASMA P1
(80° x 55°)
• 15” 2 - Way Powered
• 80 °x 55° Speaker System
• Compact, ergonomically designed cabinet
• 550 W + 150 W dynamic output power
• 132 dB maximum SPL
• EVX155RMD 15” LF transducer
• ND6 HF compression driver
• Simple, versatile suspensions with PSA-V™
(Plasma Strong-Arm-Mount-Vertical)
PLASMA P2
• 18” powered subwoofer
• Compact, ergonomically designed
cabinet
• 800W dynamic output power
• EVX180B direct radiating 18” woofer
• 132 dB maximum SPL
• Extended bass response
• Integrated heavy-duty casters for
easy transport
PLASMA P1 PLASMA P2
Frequency Response (-3 dB) 45 Hz - 17 kHz 40 Hz - 100 Hz
Frequency Range (-10dB) 38 Hz - 19 kHz 30 Hz - 110 Hz
Calc. Max SPL 132 dB 132 dB
Horizontal Coverage 80° -
Vertical Coverage 55° -
Amplifier Design Class H Class H
THD <0.01% <0.05%
Input Impedance 20 kOhms 20 kOhms
LF Amplifier Power 460W RMS (550W Peak) 550W RMS (800W Peak)
HF Amplifier Power 140W RMS (150W Peak) -
High Pass Crossover 100 Hz
(switchable)
Level Control
- ∞ to +6 dB - ∞ to +6 dB
Input Sensitivity + 6 dB for full output + 6 dB for full output
LF Transducer 381mm (15”) EVX155RMD 460mm (18”) EVX180B
HF Transducer 35,6 mm (1.4”) exit ND6 -
compression driver
Connectors:
Balanced Line Inputs
XLR and 1/4” phone XLR and 1/4” phone
Combination Combination
Balanced Output XLR XLR
Power Requirement 100, 120, 230 or 240 VAC 100, 120, 230 or 240 VAC
50-60 Hz 50-60 Hz
Enclosure Material 13-ply Birch Plywood 13-ply Birch Plywood
Cabinet Finish Futura Futura
Grille Powder-Coated Steel Powder-Coated Steel
with cloth with cloth
Dimensions ( H x W x D) : 615 x 475 x 400 mm 910 x 476 x 600 mm
24.2” x 18.8” x 15.7” 25.8” x 18.8” x 23.6”
Net Weight 42,3 kg (93 lbs) 63,6 kg (140 lbs)