Epson WorkForce Pro WF-M5799 Workgroup Monochrome Multifunction Printer with Replaceable Ink Pack System User Manual
Page 383
383
Security
WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WPA-2 Enterprise (AES)
WEP (64/128 bit)
Note:
Wi-Fi Direct mode supports only WPA2-PSK (AES) security.
Frequency band
2.4 GHz
Maximum radio-frequency
power transmitted
20 dBm (EIRP)
Communication mode
Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note:
Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Ethernet
Standard
IEEE802.3i (10BASE-T)*
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)*
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector
RJ-45
* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
Security
IEEE802.1X; requires the connected device to comply with IEEE802.1x
IPsec/IP Filtering
SSL/TLS; either HTTPS Server/Client or IPPS
SMTPS (STARTTLS, SSL/TLS)