Epson WorkForce Pro WF-M5799 Workgroup Monochrome Multifunction Printer with Replaceable Ink Pack System - Manual (Page 379)

379
Resolution Monochrome
Standard: 203 pixels per inch × 98 lines per inch (8 pixels per mm ×
3.85 lines per mm)
Fine: 203 pixels per inch × 196 lines per inch (8 pixels per mm × 7.7
lines per mm)
Super Fine: 203 pixels per inch × 392 lines per inch (8 pixels per mm
× 15.4 lines per mm)
Ultra Fine: 406 pixels per inch × 392 lines per inch (16 pixels per mm
× 15.4 lines per mm)
Color
200 × 200 dpi
Page memory Up to 550 pages (when an ITU-T No. 1 chart is received in
monochrome draft mode)
Redial 2 times (with 1 minute interval); may differ depending on your
country or region
Interface RJ-11 Phone Line
RJ-11 Telephone set connection
Parent topic: Technical Specifications
Ink Pack Specifications
Note: This printer is designed for use with Epson ink packs only, not third-party ink packs or ink. Other
brands of ink supplies are not compatible and, if described as compatible, may not function properly or
continuously. Such restrictions can be avoided with some other printers such as Epson EcoTank
cartridge-free printers.
The included initial ink pack is designed for reliable printer setup and cannot be used as a replacement
ink pack or resold. After setup, the remaining ink is available for printing. Yields are based on ISO 24711
in default mode, printing continuously. Yields vary due to print images, settings, and temperatures.
Printing infrequently reduces yields. Your ink pack must be installed with ink for printing and printer
maintenance. For print quality, some ink remains in the replaced ink pack.
Color Black