Incorrect image size or position, Slanted printout, Incorrect image size or position slanted printout – Epson WorkForce Pro WF-M5799 Workgroup Monochrome Multifunction Printer with Replaceable Ink Pack System User Manual

Page 352

352

• If you are using the Windows PostScript printer software, the product cannot print binary data if it is

connected to the computer using a USB cable. Try selecting

ASCII

TBCP

as the

Output Protocol

setting on the Device Settings tab in the printer properties.

• If you are using the Windows PostScript printer software, select the appropriate substitution fonts on

the Device Settings tab in the printer properties.

Parent topic:

Solving Page Layout and Content Problems

Incorrect Image Size or Position

If your printed image is the wrong size or in the wrong position, try these solutions:

• Make sure you selected the correct paper size and layout settings in your printing program and printer

software.

• Make sure you selected the correct paper size on the control panel.

• Make sure your paper is positioned correctly for feeding into the printer.

• Slide the edge guides against the edges of the paper.

• Clean the scanner glass and document cover.

• If the edges of a copy are cropped, slightly move the original away from the edges of the scanner

glass.

• Be sure to select the correct

Original Size

setting for your original in the Copy settings.

You can use the preview option in your printer software to check your margins before you print.

Parent topic:

Solving Page Layout and Content Problems

Slanted Printout

If your printouts are slanted, try these solutions:

• Slide the edge guides against the edges of the paper.

• Select a higher print quality setting in your printer software.

This manual is related to the following products: