Cleaning and transporting your product, Cleaning your product – Epson WorkForce Pro WF-M5799 Workgroup Monochrome Multifunction Printer with Replaceable Ink Pack System User Manual
Page 315
315
Cleaning and Transporting Your Product
See these sections if you need to clean or transport your product.
Cleaning Your Product
Transporting Your Product
Cleaning Your Product
To keep your product working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, benzene, alcohol, or paint thinner to clean the product or you may
damage it. Do not use oil or other lubricants inside the product or let water get inside it. Close the rear
paper feed slot when you are not using it, to keep out dust.
1.
Turn off the product.
2.
Wait for the
power light to turn off, then unplug the power cable.
3.
Disconnect any connected cables.
4.
Remove all the paper from the product.
5.
Clean the outer case and control panel with a soft, dry cloth. Do not use liquid or chemical cleansers.