Epson WorkForce Pro WF-M5799 Workgroup Monochrome Multifunction Printer with Replaceable Ink Pack System User Manual

Page 355

355

• Avoid handling printouts on glossy paper right after printing to allow the ink to set.

• Turn off any high speed settings in your product software.

• If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily

saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first.
Make sure the ink has dried before reloading the paper to print on the other side. Adjust the density
and/or ink drying time settings.

• If printed copies are smeared, lower the copy density setting on the product control panel.

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

• Align the print head.

• Adjust the print quality in the product software.

• Clean the paper path.

• Do not press too hard on the original or the document cover when you are scanning originals on the

scanner glass.

• Clean the scanner glass.

• Clean the ADF.

Note:

Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that

extends beyond the base of the product in all directions.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Cleaning
Print Quality Adjustment

Related references

Paper Specifications
Available Epson Papers

This manual is related to the following products:

Expression Photo HD XP-15000 Inkjet Printer