Epson WorkForce Pro WF-M5799 Workgroup Monochrome Multifunction Printer with Replaceable Ink Pack System - Manual (Page 21)

21
Selecting Your Country or Region
Before using your product, select the country or region in which you are using your product.
Note: If you change the country or region, your fax settings return to their defaults and you must select
them again. This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Settings .
3. Select General Settings > Basic Settings .
4. Scroll down and select Country/Region .
5. Scroll up or down, if necessary, and select your country or region.
You see a confirmation screen about returning your fax settings to their defaults.
6. If the setting is correct, select Yes . (If not, select No .)
Parent topic: Using the Control Panel
Setting a Password and Locking the Control Panel
You can set an administrator password to lock the following settings and prevent them from being
changed:
• Certain Basic Settings and Printer Settings
• System Administration Settings
• Presets