Sony DT 11-18mm f/4.5-5.6 Lens User Manual
Page 84
6. Menu Display and Settings: Paint/Look Menu
84
Paint/Look >Detail
Sets detail adjustment settings.
Item
Sub-item setting
Description
Setting
On
/ Off
Turns the detail function on/off.
Level
–7 to +7 (
±0
)
Sets the detail level.
Manual
Setting
On /
Off
/ ---
Turns the detail manual adjustment
function on/off.
V/H Balance
–2 to +2 (
±0
)
Sets the balance between vertical (V) and
horizontal (H) detail for detail manual
adjustment.
B/W Balance Type1 / Type2 /
Type3
/ Type4 / Type5
Sets the balance between black (B) detail
for low-luminance areas and white (W)
detail for high-luminance areas for detail
manual adjustment.
Limit
0 to
7
Sets the limit level of the detail for detail
manual adjustment.
Crispening
0
to 7
Sets the crispening level for detail
manual adjustment.
High Light
Detail
0
to 4
Sets the detail level of high-luminance
areas for detail manual adjustment.
Paint/Look >Matrix
Sets matrix correction settings.
Item
Sub-item setting
Description
User Matrix
On /
Off
Turns the user matrix correction function
on/off.
User Matrix
Level
–99 to +99 (
±0
)
Adjusts the color saturation of the entire
image.
User Matrix
Phase
–99 to +99 (
±0
)
Adjusts the color tone (phase) of the
entire image.
User Matrix
R-G
–99 to +99 (
±0
)
Sets a user-defined R-G user matrix.
User Matrix
R-B
–99 to +99 (
±0
)
Sets a user-defined R-B user matrix.
User Matrix
G-R
–99 to +99 (
±0
)
Sets a user-defined G-R user matrix.
User Matrix
G-B
–99 to +99 (
±0
)
Sets a user-defined G-B user matrix.
User Matrix
B-R
–99 to +99 (
±0
)
Sets a user-defined B-R user matrix.
User Matrix
B-G
–99 to +99 (
±0
)
Sets a user-defined B-G user matrix.
Paint/Look >Multi Matrix
Sets multi matrix correction settings.
Item
Sub-item setting
Description
Setting
On /
Off
Turns the multi matrix correction function
on/off.
Reset
Execute / Cancel
Resets the hue and saturation of each
axis color to the default values.
Axis
B
/ B+ / MG– / MG / MG+ / R / R+ / YL– /
YL / YL+ / G– / G / G+ / CY / CY+ / B–
Selects the axis.
Hue
–99 to +99 (
±0
)
Sets the hue of the color used for multi
matrix correction.
Saturation
–99 to +99 (
±0
)
Sets the saturation of the color used for
multi matrix correction.