Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 64)

5. Thumbnail Screen 64
Playing Clips
Playing Recorded Clips
You can play recorded clips when the
camcorder is in recording standby (Stby)
mode.
1
Insert the memory card to play.
2
Press the THUMBNAIL button.
3
Use the multi selector (page 7) or
multi-function dial (page 5) to move
the cursor to the thumbnail for the clip
you want to play.
4
Press the multi selector apply button or
multi-function dial.
Playback begins from the start of the
selected clip.
You can control playback by pressing the
following buttons.
Press the multi selector apply button or
multi-function dial:
Pauses playback.
Press again to return to normal playback.
Press the multi selector left/right buttons:
Jumps to start of clip/start of next clip.
Press and hold the multi selector left/right
buttons:
Fast reverse/forward.
Returns to normal playback when you
release the button.
CANCEL/BACK button:
Stops playback, and returns to recording
standby mode.
[Notes]
ˎ ˎ There may be momentary picture breakup or still
image display at the boundary between clips. You
cannot operate the camcorder during this period.
ˎ ˎ When you select a clip in the thumbnail screen and
begin playback, there may be momentary picture
breakup at the start of the clip. To view the start of the
clip without breakup, put the camcorder into playback
mode, pause, use the multi selector left button to
return to the start of the clip, and start play again.