Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 65)

5. Thumbnail Screen 65
On the thumbnail screen, you can operate
the clips or check clip properties using the
Thumbnail menu of the full menu.
The Thumbnail menu (page 92) appears
when you press and hold the MENU button
and select Thumbnail.
Thumbnail Menu Operations
Use the multi selector (page 7) or the
multi-function dial (page 5) to select a
function, then press the multi selector apply
button or multi-function dial.
Press the CANCEL/BACK button (page 5)
to return to the previous screen.
[Note]
Some items cannot be selected, depending on the state
when the menu was displayed.
Menu Items for Clip Operations
ˎ ˎ Display Clip Properties
ˎ ˎ Set Clip Flag
ˎ ˎ Lock/Unlock Clip
ˎ ˎ Delete Clip
ˎ ˎ Transfer Clip
ˎ ˎ Transfer Clip (Proxy)
ˎ ˎ Filter Clips
ˎ ˎ Customize View
For details about clip operation menu items,
see the Thumbnail menu (page 92).
Displaying clip properties
Select Display Clip Properties (page 92)
in the Thumbnail menu to display the clip
properties screen.
Adding clip flags
You can add clip flags (OK, NG or KP marks) to
clips to filter the display of clips based on the
clip flags.
Select the thumbnail for the clip to which you
want to add a clip flag, then select the clip
flag using Set Clip Flag (page 92) in the
Thumbnail menu of the full menu.
Setting Added clip flag
Add OK OK
Add NG NG
Add KEEP KP
[Tips]
ˎ ˎ You can also use an assignable button assigned with
the clip flag function to add clip flags (page 48).
ˎ ˎ You can add an OK clip flag to the thumbnail of the
selected clip (page 50) by pressing the Clip Flag
button (page 5).
Displaying the filtered clip thumbnail
screen
Select Filter Clips (page 92) in the
Thumbnail menu of the full menu, and select
a clip flag type to display only those clips that
have the specified flag.
To display all clips, select All.
[Tip]
You can also switch filters in sequence using the
DISPLAY button.
Deleting clips
You can delete clips from memory cards.
Select Delete Clip >Select Clip or All Clips in
the Thumbnail menu of the full menu.
Select Clip:
Deletes the selected clip. Multiple clip
selection is supported.
All Clips:
Deletes all of the displayed clips.
Changing the information displayed on
the thumbnail screen
You can change the clip/frame information
displayed below the thumbnail.
Select Customize View >Thumbnail Caption
in the Thumbnail menu of the full menu, and
select the information to display.
Date Time:
Displays the date and time the clip was
created and last modified.
Time Code:
Displays the timecode.
Duration:
Displays the duration of the clip.
Sequential Number:
Displays a sequential number on each
thumbnail.
Clip Operations