Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 105)

6. Menu Display and Settings 105
Configuration Data
You can save the settings of the full menu to
a memory card inserted into CFexpress Type
A/SD card slot (B). This allows you to quickly
recall an appropriate set of menu settings for
the current situation.
Configuration data is saved in the following
categories.
User files
User files save the setting items and data of
the customizable User menu.
You can save up to 64 files on a memory card.
By loading this file into the camcorder
memory, you can customize the setup of the
User menu.
ALL (all settings) files
ALL files save the configuration data of all
menus. You can save up to 64 files on a
memory card.
[Note]
Device specific data (shading, output levels, and other
data that requires adjustment for the specific device) is
not saved.
Saving a User File / ALL File
1
Insert a memory card into CFexpress Type
A/SD card slot (B) (page 6).
ˎ ˎ For CFexpress cards, the label faces to
the left.
ˎ ˎ For SD cards, the label faces to the right
with the beveled corner at the bottom.
2
For a user file, select User File >Save
Media(B) (page 82) >Execute in the
Project menu of the full menu.
For an ALL file, select All File >Save
Media(B) (page 82) >Execute in the
Project menu of the full menu.
A file save destination screen appears.
3
Select a “No File” row on the save
destination screen.
Selecting a row with a File ID entry will
overwrite the selected file.
The File ID is generated automatically, but
you can modify it.
4
Select Execute on the confirmation
screen.
Loading a User File / ALL File
1
Insert a memory card on which a file is
saved into CFexpress Type A/SD card slot
(B) (page 6).
ˎ ˎ For CFexpress cards, the label faces to
the left.
ˎ ˎ For SD cards, the label faces to the right
with the beveled corner at the bottom.
2
For a user file, select User File >Load
Media(B) (page 82) >Execute in the
Project menu of the full menu.
For an ALL file, select All File >Load
Media(B) (page 82) >Execute in the
Project menu of the full menu.
A file list screen appears.
3
Select a file to load.
A confirmation screen appears.
4
Select Execute.
[Notes]
ˎ ˎ The unit will reboot automatically after loading
configuration data.
ˎ ˎ When All File >Load Network Data in the Project menu
of the full menu is set to Off, all settings in the ALL file
are loaded except Network menu settings.
Changing the File ID
1
For a user file, select User File >File ID
(page 82) in the Project menu of the
full menu.
For an ALL file, select All File >File ID
(page 82) in the Project menu of the
full menu.
A screen for editing the File ID appears.
2
Select a character using the multi selector
(page 7) or the multi-function dial
(page 5), then press the multi selector
apply button or multi-function dial.
3
Repeat step 2 as required.
4
When finished entering characters, select
Done.
Saving and Loading Configuration Data