Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 79)

6. Menu Display and Settings: Project Menu 79
Project >SDI/HDMI Rec Control
Sets SDI/HDMI recording control settings.
Item Sub-item setting Description
Setting Off / SDI/HDMI Remote I/F / Parallel Rec Sets recording start/stop control of an
external device via the SDI/HDMI output
signal.
Off:
Do not use remote control.
SDI/HDMI Remote I/F:
Record stop/start control of an
external connected device, when
there is no media inserted in the
camcorder. Not synchronized with
frame accuracy to camcorder media.
Parallel Rec:
Record stop/start control of an
external connected device, when
media is inserted in the camcorder.
Synchronized with frame accuracy to
camcorder media.
[Note]
For control using the HDMI output signal, set
HDMI TC Out >Setting (page 85) in the
TC/Media menu of the full menu to On.
Project >Assignable Button
Sets function assignments to assignable buttons.
Item Sub-item setting Description
<1> to <9>,
Focus Hold
Button Off / Base ISO/Sensitivity / AGC / Push
AGC / ND Filter Position / Auto ND Filter /
Push Auto ND / Auto Iris / Push Auto Iris /
Auto Shutter / Auto Exposure Level /
Backlight / Spotlight / Preset White
Select / ATW / ATW Hold / AF Speed/
Sens. / Focus Setting / Focus Area / Focus
Area(AF-S) / Face/Eye Detection AF / Push
AF Mode / Push AF/Push MF / Focus
Hold / Focus Magnifier x3/x6 / Focus
Magnifier x3 / Focus Magnifier x6 / S&Q
Motion / SteadyShot / Rec / Rec Review /
Clip Flag OK / Clip Flag NG / Clip Flag
Keep / Color Bars / Tally [Front] /
DURATION/TC/U-BIT / Display / Lens Info /
Video Signal Monitor / Marker / VF
Adjust / VF Mode / Gamma Display
Assist / Peaking / Zebra / Volume /
Thumbnail / Touch Operation / Handle
Zoom / NFC / Auto Upload (Proxy) / Direct
Menu / User Menu / Menu Assigns functions to assignable buttons.
Base ISO/Sensitivity:
Switches the base sensitivity of the
image sensor.
AGC:
Turns the AGC function on/off.
Push AGC:
Enables the AGC function while the
button is pressed.
ND Filter Position:
Switches ND filters.
Auto ND Filter:
Turns the auto ND filter function on/
off.
Push Auto ND:
Enables the auto ND filter function
while the button is pressed.
Auto Iris:
Turns the iris function on/off.
Push Auto Iris:
Enables the auto iris function while
the button is pressed.
Auto Shutter:
Turns the auto shutter function on/
off.
Auto Exposure Level:
Displays/exits the Auto Exposure
Level direct menu.
Backlight:
Switches between Backlight and
Standard.
Spotlight:
Switches between Spotlight and
Standard.
Preset White Select:
Switches the white balance preset
mode value.
ATW:
Turns the ATW function on/off.
ATW Hold:
Pauses ATW function operation.