Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 13)

1. Overview: Screen Display 13
Icon Display
Network connection icon display
Network mode Connection status Icon
Access point mode Operating as an access point
Access point operation error
Station mode Wi-Fi connection
Icon changes according to the signal
strength (4 steps)
Wi-Fi disconnected (including when
establishing connection)
Wi-Fi connection error
USB tethering USB tethering connected
USB tethering disconnected
USB tethering error
UWP-D series icon display
Transmitter status Receive status Icon
Power off Not receiving
Normal transmit status Receiving
–
(receive level (4 steps))
Muting status Receiving (muted)
Remaining battery capacity warning
status Receiving
(Icon flashing)
Muting and remaining battery capacity
warning status Receiving
(Icon flashing)
Status Screen
You can check the settings and status of the
camcorder on the status screen. The settings
of items marked with an asterisk (*) can be
changed.
The status screen supports touch operation.
To display the status screen
ˎ ˎ Press the MENU button.
To switch the status screen
ˎ ˎ Turn the multi-function dial.
ˎ ˎ Push the multi selector up/down
ˎ ˎ Swipe the status screen up/down.
To hide the status screen
ˎ ˎ Press the MENU button.
To change a setting
With the status screen displayed, press the
multi-function dial or multi selector to enable
selection of a setup item within a page. Select
a page number and then press to switch
pages.
You can also select items directly using touch
operation.
[Note]
You can disable changes from the status screen by
setting Menu Settings >User Menu Only (page 93) in
the Technical menu of the full menu to On.
Main Status screen
Displays the main functions of the camera and
the free space on the media.
Display item Description
S&Q Frame Rate Frame rate setting for Slow
& Quick Motion shooting
Frequency/Scan* System frequency and
scanning method settings
Imager Scan* Scan mode of the image
sensor
Media Remain
(A) Remaining free space on
media in slot A
ND Filter ND filter setting
ISO/Gain/EI ISO/Gain/Exposure Index
setting
Base ISO/
Sensitivity* Base ISO/Base Sensitivity
setting
Codec* Codec setting for recording
Media Remain (B) Remaining free space on
media in slot B
Scene File* Scene file in use and its File
ID setting
Base Look/LUT* Monitor LUT setting
Shutter Shutter speed or shutter
angle setting
Iris Iris setting
Video Format* Picture size for recording to
memory cards
RAW Output
Format* Image size of the RAW
output
White Balance White balance setting