Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 53)

3. Shooting: Shooting with the Desired Look 53
Customizing a Look
You can customize the look based on the base
look using the Matrix and other setup items
in the Paint/Look menu of the full menu. For
details about each setup item, see page 83.
Connect your camcorder to a TV or monitor,
and adjust the picture quality while observing
the picture on the TV or monitor screen.
[Note]
When you import a 3D LUT file and apply it to the image,
the desired look defined in the 3D LUT file will not be
obtained if Matrix and settings other than base look
settings in the Paint/Look menu are changed. You can
reset all customized settings using Reset Paint Settings
>Reset without Base Look (page 83) in the Paint/Look
menu of the full menu.
Saving a Look
You can save the current look as a scene file
in internal memory using Scene File >Store
(page 83) in the Paint/Look menu of the full
menu.
You can quickly save using operations in the
direct menu from the shooting screen.
[Note]
If you select another look without saving the current
look, the current look is discarded.
[Tip]
You can overwrite the preset scene files.
To restore a preset scene file, load the look to be
restored using Scene File >Preset Recall (page 83) in
the Paint/Look menu of the full menu, and then save the
scene file using Scene File >Store.
Deleting a saved look
You can delete a scene file saved in internal
memory using Scene File >Delete (page 83)
in the Paint/Look menu of the full menu.
[Tip]
When deleted, it is no longer displayed in the direct
menu.
Deleting a base look
You can delete an imported 3D LUT file using
Base Look >Delete (page 83) in the Paint/
Look menu of the full menu.
You can delete all imported 3D LUT files using
Base Look >Delete All (page 83) in the
Paint/Look menu of the full menu.
[Notes]
ˎ ˎ Before deleting, check that the base look is not being
used in any scene files. If a base look that is being
used is deleted, the look of the corresponding scene
files will be incorrect.
ˎ ˎ Imported 3D LUT files are not deleted when All Reset
>Reset (page 99) is selected in the Maintenance
menu of the full menu.
ˎ ˎ A deleted base look can no longer be used as a LUT in
Cine EI mode (page 54).