Sony DT 11-18mm f/4.5-5.6 Lens - Manual (Page 11)

11 1. Overview
Screen Display
During shooting (recording/standby) and playback, the camcorder status and settings are
superimposed on the image displayed in the viewfinder.
You can show/hide the information using the DISPLAY button. Even when hidden, it will appear
while performing direct menu (page 48) operations.
You can also select to show/hide each item independently (page 87).
Information Displayed on the Screen While Shooting
3 4 2
6
8
9 10 7 5
11
12
13
14
15
16
17
18 19 20 21 22 23 24 25 26 27 28
29
30
31
32
33
34
35
36
1
1. Network status indicator (page 13)
Displays the network connection status as an
icon.
2. Upload indicator/remaining files indicator
(page 61)
3. Focus area indicator (page 37)
Displays the focus area for auto focus.
4. Recording mode, slot A/B, Interval Rec
recording interval indicator (page 49)
Display Meaning
 Rec Recording
Stby Recording standby
5. Depth-of-field indicator
6. Imager scan mode indicator (page 24)
A mark is displayed if there is a mismatch
between the image circle size of the lens and
the effective picture size imager scan mode
setting.
When Imager Scan Mode is set to FF, a “C”
mark is displayed in modes with narrower
angle of view (cropped).
Cropping occurs in the following modes.
ˎ ˎ When the recording format is 3840×2160
and S&Q Motion frame rate is 100 fps or
120 fps
ˎ ˎ When Codec is set to RAW or RAW & XAVC-I
and the RAW output format is 3840×2160
7. RAW output operation status indicator
(page 55)
Displays the output status of the RAW signal.
8. UWP-D series status indicator
(page 13)
Displays the RF level signal strength as an icon
when a UWP-D series device is connected
to the MI shoe configured for digital audio
transfer.
9. Slow & Quick Motion shooting frame rate
indicator (page 49)
10. Remaining battery capacity/DC IN voltage
indicator (page 17)
11. Focus mode indicator (page 41)
Meaning Display
Focus Hold mode Focus Hold
MF mode MF
AF mode AF
Face/eye detection AF (AF/ /Only/ / )
Face/eye detection
icon
Face/eye detection AF
icon
Only
Registered face icon
AF paused icon during
face/eye detection
AF
1)
1) Displayed when there is no registered face and a face
is not detected, or when there is a registered face and
the registered face is not detected.
12. Zoom position indicator (page 36)
Displays the zoom position in the range 0
(wide angle) to 99 (telephoto) (if a lens that
supports zoom setting display is attached).
The display can be changed to a bar indicator
or focus distance indicator (page 94).
The following items are added to the display
when Clear Image Zoom is enabled.
Display Meaning
Clear Image Zoom is enabled
Magnification
value When using Clear Image
Zoom
13. Image stabilization mode indicator
14. SDI output/HDMI output Rec Control
status indicator (page 106)
Displays the output status of the REC control
signal.
15. Focus indicator (page 40)
16. Remaining media capacity indicator
17. White balance mode indicator
Display Meaning
Auto mode
Hold
Auto mode paused
W:P Preset mode
W:A Memory A mode
W:B Memory B mode
18. Timecode external lock indicator/time
data display (page 34)
Displays “EXT-LK” when locked to the
timecode of an external device.
19. ND filter indicator (page 43)
20. Scene file indicator (page 105)
21. Iris indicator
Displays the iris position (F value) (if a lens that
supports iris setting display is attached).
22. Video level warning indicator
23. Gain indicator (page 42)
Displays the EI value when in Cine EI mode
(page 24).
Display Meaning
Auto mode
H Preset H mode
M Preset M mode
L Preset L mode
Temporary adjustment
mode