PLANET WGS3-2820 - Manual (Page 93)

User’s Manual of WGS3-2820/WGS3-5220
93
•
Request Timed Out A directed SNTP request timed out without receiving a response from the SNTP server.
•
Bad Date Encoded The time provided by the SNTP server is not valid.
•
Version Not Supported TheSNTP version supported by the server is not compatible with the version supported
by the client.
•
Server Unsychronized The SNTP server is not synchronized with its peers. This is indicated via the 'leap
indicator' field on the SNTP message.
•
Server Kiss Of Death The SNTP server indicated that no further queries were to be sent to this server. This is
indicated by a stratum field equal to 0 in a message received from a server.
。 Server IP Address - Specifies the IP address of the server for the last received valid packet. If no message has
been received from any server, an empty string is shown.
。 Address Type - Specifies the address type of the SNTP Server address for the last received valid packet.
。 Server Stratum - Specifies the claimed stratum of the server for the last received valid packet.
。 Reference Clock Id - Specifies the reference clock identifier of the server for the last received valid packet.
。 Server Mode - Specifies the mode of the server for the last received valid packet.
。 Unicast Sever Max Entries - Specifies the maximum number of unicast server entries that can be configured on
this client.
。 Unicast Server Current Entries - Specifies the number of current valid unicast server entries configured for this
client.
。 Broadcast Count - Specifies the number of unsolicited broadcast SNTP messages that have been received and
processed by the SNTP client since last reboot.
4.2.12.3 Server Configuration
Figure 4-2-61 SNTP Server Configuration
Configurable Data
。 Server - Specifies all the existing Server Addresses along with an additional option "Create". When the user selects
"Create" another text box "Address" appears where the user may enter Address for Server to be configured.