PLANET WGS3-2820 - Manual (Page 518)

User’s Manual of WGS3-2820/WGS3-5220
518
Hello Interval This field indicates the frequency at which PIM hello messages are transmitted on this
interface. This is a configured value. By default, the value is 30 seconds.
CBSR Preference This field shows the preference value for the local interface as a candidate bootstrap
router. This is a configured value.
CRP Preference This field shows the preference value as a candidate rendezvous point on this interface.
CBSR Hash Mask Length This field shows the hash mask length to be advertised in bootstrap messages if this
interface is elected as the bootstrap router. The value is used in the hash algorithm for
selecting the RP for a particular group.
13.5.17 show ip pimsm interface stats
This command displays the statistical information for PIM-SM on the specified interface.
▫ Format show ip pimsm interface stats { | all}
▫ Mode Privileged EXEC and User EXEC
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
IP Address This field indicates the IP Address that represents the PIM-SM interface.
Subnet Mask This field indicates the Subnet Mask of this PIM-SM interface.
Designated Router This indicates the IP Address of the Designated Router for this interface.
Neighbor Count This field displays the number of neighbors on the PIM-SM interface.
13.5.18 show ip pimsm neighbor
This command displays the neighbor information for PIM-SM on the specified interface.
▫ Format show ip pimsm neighbor { | all}
▫ Mode Privileged EXEC and User EXEC
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
IP Address This field displays the IP Address of the neighbor on an interface.
Up Time This field indicates the time since this neighbor has become active on this interface
Expiry Time This field indicates the expiry time of the neighbor on this interface.