PLANET WGS3-2820 User Manual
Page 311
User’s Manual of WGS3-2820/WGS3-5220
311
Configurable Data
o
IP Address
- IP Address of the RP to be created or deleted.
o
Group
- Group Address of the RP to be created or deleted.
o
Group Mask
- Group Mask of the RP to be created or deleted.
Command Buttons
o
Submit
- Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration changes take
effect immediately. These changes will not be retained across a power cycle unless a save is performed.
o
Delete
- Attempts to remove the specified static RP IP Address for the PIM-SM router. Configuration changes take
effect immediately. These changes will not be retained across a power cycle unless a save is performed.
This manual is related to the following products: