PLANET WGS3-2820 - Manual (Page 296)

User’s Manual of WGS3-2820/WGS3-5220
296
4.7.4.5 Mtrace Configuration
Figure 4-6-72 Mtrace Configuation
Configurable Data
o Admin Mode - Select enable or disable from the pulldown menu. If you select enable the router will process and
forward mtrace requests received from other routers, otherwise received mtrace requests will be discarded. This
field is non-configurable for read-only users.
Command Buttons
o Submit - Send the updated configuration to the router. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a save is performed.