PLANET WGS3-2820 - Manual (Page 318)

User’s Manual of WGS3-2820/WGS3-5220
318
clear config Enter yes when the prompt pops up to clear all the configurations
made to the switch.
copy
system:running-config
nvram:startup-config
Enter yes when the prompt pops up that asks if you want to save
the configurations made to the switch.
reload OR Cold Boot the
Switch
Enter yes when the prompt pops up that asks if you want to reset
the system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.
Table 5-7 Quick Start up Factory Defaults