PLANET WGS3-2820 User Manual
Page 151
User’s Manual of WGS3-2820/WGS3-5220
151
¾
Auto:
The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server.
。
Operating Control Mode -
This field indicates the control mode under which the port is actually operating.
Possible values are:
¾
ForceUnauthorized
¾
ForceAuthorized
¾
Auto
。
Reauthentication Enabled -
This field shows whether reauthentication of the supplicant for the specified port is
allowed. The possible values are 'true' and 'false'. If the value is 'true' reauthentication will occur. Otherwise,
reauthentication will not be allowed.
。
Port Status -
This field shows the authorization status of the specified port. The possible values are 'Authorized'
and 'Unauthorized'.
Figure 4-4-3
Port Access Control Port Summary
4.4.1.4 Port Access Control Statistics
This page shows the statistics of access control on each port.
。
Port -
Selects the port to be displayed. When the selection is changed, a screen refresh will occur causing all fields
to be updated for the newly selected port. All physical interfaces are valid.
。
EAPOL Frames Received -
This displays the number of valid EAPOL frames of any type that have been received
by this authenticator.
。
EAPOL Frames Transmitted -
This displays the number of EAPOL frames of any type that have been transmitted
by this authenticator.
。
EAPOL Start Frames Received -
This displays the number of EAPOL start frames that have been received by
this authenticator.