PLANET WGS3-2820 - Manual (Page 478)

User’s Manual of WGS3-2820/WGS3-5220
478
metric value.
Import Summary LSA Controls the import of summary LSAs into stub areas
12.7.55 show ip ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and neighbor. The parameter
identifies the area and the parameter identifies the neighbor's Router ID.
▫ Format show ip ospf virtual-link
▫ Modes Privileged EXEC
User EXEC
Area ID The area id of the requested OSPF area
Neighbor Router ID The input neighbor Router ID
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Iftransit Delay Interval The configured transit delay for the OSPF virtual interface.
Retransmit Interval The configured retransmit interval for the OSPF virtual interface.
Authentication Type The configured authentication type of the OSPF virtual interface.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router. This is the state of the OSPF interface.
Neighbor State The neighbor state.
12.7.56 show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
▫ Format show ip ospf virtual-link brief
▫ Modes Privileged EXEC
User EXEC
Area Id The area id of the requested OSPF area.
Neighbor The neighbor interface of the OSPF virtual interface.
Hello Interval The configured hello interval for the OSPF virtual interface.