PLANET WGS3-2820 - Manual (Page 378)

User’s Manual of WGS3-2820/WGS3-5220
378
8.8.6 clear traplog
This command clears the trap log.
▫ Format clear traplog
▫ Mode Privileged EXEC
8.8.7 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
▫ Format clear vlan
▫ Mode Privileged EXEC
8.8.8 copy
This command uploads and downloads to/from the switch. Local URLs can be specified using tftp or xmodem. The following
can be specified as the source file for uploading from the switch: startup configuration (nvram:startup-config), error log
(nvram:errorlog) , message log (nvram:msglog) and trap log (nvram:traplog). A URL is specified for the destination.
The command can also be used to download the startup configuration or code image by specifying the source as a URL and
destination as nvram:startup-config or .system:image respectively.
The command can be used to the save the running configuration to nvram by specifying the source as system:running-config
and the destination as nvram:startup-config
The command can also be used to download ssh key files as nvram:sshkey-rsa, nvram:sshkey-rsa2, and nvram:sshkey-dsa
and http secure-server certificates as nvram:sslpem-root, nvram:sslpemserver, nvram:sslpem-dhweak, and
nvram:sslpem-dhstrong .
▫ Default none
▫ Format copy nvram:startup-config
copy nvram:errorlog
copy nvram:msglog
copy nvram:traplog
copy nvram:startup-config
copy system:image
copy system:running-config nvram:startup-config
copy nvram:sslpem-root
copy nvram:sslpem-server
copy nvram:sslpem-dhweak
copy nvram:sslpem-dhstrong
copy nvram:sshkey-rsa1
copy nvram:sshkey-rsa2
copy nvram:sshkey-dsa
▫ Mode Privileged EXEC