PLANET WGS3-2820 - Manual (Page 306)

User’s Manual of WGS3-2820/WGS3-5220
306
o Hello Interval - Enter the time in seconds between the transmission of which PIM Hello messages on this interface.
The valid values are from (10 to 3600 secs) . The default value is 30.
o CBSR Preference - Enter the preference value for the local interface as a candidate bootstrap router. The value of
-1 is used to indicate that the local interface is not a candidate BSR interface. The valid values are from (-1 to 255)
The default value is 0.
o CBSR Hash Mask Length - Enter the CBSR hash mask length to be advertised in bootstrap messages if this
interface is elected as the bootstrap router. This hash mask length will be used in the hash algorithm for selecting the
RP for a particular group. The valid values are from (0 to 32). The default value is 30.
o CRP Preference - Enter the preference value for the local interface as a candidate bootstrap router. The value of -1
is used to indicate that the local interface is not a candidate BSR interface. The valid values are from (-1 to 255). The
default value is 0.
Command Buttons
o Submit - Send the updated configuration to the router. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a save is performed.