PLANET WGS3-2820 - Manual (Page 92)

User’s Manual of WGS3-2820/WGS3-5220
92
。 Unicast Poll Retry - Specifies the number of times to retry a request to an SNTP server after the first time-out
before attempting to use the next configured server when configured in unicast mode. Allowed range is (0 to 10).
Default value is 1.
Command Buttons
。 Submit - Sends the updated configuration to the switch. Configuration changes take effect immediately.
4.2.12.2 Global Status
Figure 4-2-60 SNTP Global Status
Non-Configurable Data
。 Version - Specifies the SNTP Version the client supports.
。 Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may be supported by a client.
。 Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated the system clock.
。 Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or receipt of an unsolicited
message.
。 Last Attempt Status - Specifies the status of the last SNTP request or unsolicited message for both unicast and
broadcast modes. If no message has been received from a server, a status of Other is displayed. These values are
appropriate for all operational modes.
•
Other None of the following enumeration values.
•
Success The SNTP operation was successful and the system time was updated.