18 show arp brief – PLANET WGS3-2820 User Manual

Page 432

User’s Manual of WGS3-2820/WGS3-5220

432

Cache Size

Is the maximum number of entries in the ARP table. This value was configured into the

unit.

Dynamic Renew Mode

Displays whether the ARP component automatically attempts to renew dynamic ARP

entries when they age out.

Total Entry Count Current /

Peak

Field listing the total entries in the ARP table and the peak entry count in the ARP table.

Static Entry Count Current

/ Max

Field listing the static entry count in the ARP table and maximum static entry count in the

ARP table.

The following are displayed for each ARP entry.

IP Address

Is the IP address of a device on a subnet attached to an existing routing interface.

MAC Address

Is the hardware MAC address of that device.

Interface

Is the routing slot/port associated with the device ARP entry.

Type

Is the type that was configured into the unit. The possible values are Local, Gateway,

Dynamic and Static.

Age

This field displays the current age of the ARP entry since last refresh (in hh:mm:ss format

12.1.18 show arp brief

This command displays the brief Address Resolution Protocol (ARP) table information.

▫

Format

show arp brief

▫

Mode

Privileged EXEC

Age Time (seconds)

Is the time it takes for an ARP entry to age out. This value was configured into the unit.

Age time is measured in seconds.

Response Time (seconds) Is the time it takes for an ARP request timeout. This value was configured into the unit.

Response time is measured in seconds.

Retries

Is the maximum number of times an ARP request is retried. This value was configured into

the unit.