PLANET WGS3-2820 - Manual (Page 494)

User’s Manual of WGS3-2820/WGS3-5220
494
with fresh results.
▫ Default none
▫ Format show mstat
▫ Mode Privileged EXEC
13.1.17 show mtrace
This command is used to display results of multicast trace path from the results buffer pool of the router, subsequent to the
execution/completion of a "mtrace [group] [receiver]" command. The results subsequent to the completion of the
"mtrace" will be available in the buffer pool within 2 minutes and thereafter. A subsequent "mtrace" command would overwrite
the results in the buffer pool.
▫ Default noneFormat show mtrace
▫ Modes Privileged EXEC User EXEC
Hops Away From Destination The ordering of intermediate routers between the source and the destination
Intermediate Router Address The address of the intermediate router at the specified hop distance
Mcast Protocol In Use The multicast routing protocol used for the out interface of the specified
intermediate router.
TTL Threshold The Time-To-Live threshold of the out interface on the specified intermediate router.
Time Elapsed Between Hops
(msecs)
The time between arrival at one intermediate router to the arrival at the next.