PLANET WGS3-2820 - Manual (Page 269)

User’s Manual of WGS3-2820/WGS3-5220
269
4.7 IP Multicast
The WGS3 supports the following Multicast routing protocol :
„ DVMRP
„ IGMP
„ Multicast
„ Mdebug
„ PIM-DM
„ PIM-SM
4.7.1 Multicast
4.7.1.1 Multicast Global Configuration
Figure 4-6-49 Multicast Global Configuation
Selection Criteria
o Admin Mode - Select enable or disable to set the administrative status of Multicast Forwarding in the router. The
default is disable.
o Protocol State - The operational state of the multicast forwarding module.
o Table Maximum Entry Count - The maximum number of entries in the IP Multicast routing table.
o Number Of Packets For Which Source Not Found - The number of multicast packets that were supposed to be
routed but which failed the RPF check.