PLANET WGS3-2820 User Manual
Page 213
User’s Manual of WGS3-2820/WGS3-5220
213
Non-Configurable Data
。
Slot/Port
- The slot and port for which the information is being displayed.
。
IP Address
- The IP Address of the router interface.
。
Send Version
- The RIP version to which RIP control packets sent from the interface conform. The value is one of
the following:
RIP-1
- RIP version 1 packets will be sent using broadcast.
RIP-1c
- RIP version 1 compatibility mode. RIP version 2 formatted packets will be transmitted using
broadcast.
RIP-2
- RIP version 2 packets will be sent using multicast.
None
- RIP control packets will not be transmitted.
The default is RIP-2.
。
Receive Version
- Which RIP version control packets will be accepted by the interface. The value is one of the
following:
RIP-1
- only RIP version 1 formatted packets will be received.
RIP-2
- only RIP version 2 formatted packets will be received.
Both
- packets will be received in either format.
None
- no RIP control packets will be received.
The default is Both.
。
RIP Admin Mode
- Whether RIP is enabled or disabled on the interface.
。
Link State
- Whether the RIP interface is up or down.
Command Buttons
。
Refresh
- Refresh the data on the screen with the present state of the data in the switch.