PLANET WGS3-2820 - Manual (Page 362)

User’s Manual of WGS3-2820/WGS3-5220
362
▫ Mac Address - An unicast MAC address for which the switch has forwarding and or filtering information. The format is 6
or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the
MAC address will be displayed as 8 bytes.
▫ Type - This displays the type of the entry. Static entries are those that are configured by the end user. Dynamic entries are
added to the table as a result of a learning process or protocol.
▫ Description - The text description of this multicast table entry.
▫ Interfaces - The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
8.6.44 show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
▫ Format show mac-address-table stats
▫ Mode Privileged EXEC
▫ Total Entries - This displays the total number of entries that can possibly be in the Multicast Forwarding Database table.
▫ Most MFDB Entries Ever Used - This displays the largest number of entries that have been present in the Multicast
Forwarding Database table. This value is also known as the MFDB high-water mark.
▫ Current Entries - This displays the current number of entries in the Multicast Forwarding Database table.
8.6.45 show monitor
This command displays the Port monitoring information for the system.
▫ Format show monitor
▫ Mode Privileged EXEC
▫ Port Monitor Mode indicates whether the Port Monitoring feature is enabled or disabled. The possible values are enable
and disable.
▫ Probe Port slot/port is the slot/port that is configured as the probe port. If this value has not been configured, 'Not
Configured' will be displayed.
▫ Monitored Port slot/port is the slot/port that is configured as the monitored port. If this value has not been configured,
'Not Configured' will be displayed.
8.6.46 show port
This command displays port information.
▫ Format show port { | all}
▫ Mode Privileged EXEC
▫ slot/port - The physical slot and physical port.
▫ Type - If not blank, this field indicates that this port is a special type of port. The possible values are:
Mon - this port is a monitoring port. Look at the Port Monitoring screens to find out more information.
Lag - this port is a member of a port-channel (LAG).
Probe - this port is a probe port.