PLANET WGS3-2820 - Manual (Page 23)

User’s Manual of WGS3-2820/WGS3-5220
23
1.4 Product Specification
Product
WGS3-2820
24-Port 10/100Mbps TP + 4-Port Gigaibt TP /
2 SFP Combo
Layer 3 Managed Ethernet Switch
WGS3-5220
48-Port 10/100Mbps TP + 4-Port Gigaibt TP /
2 SFP Combo
Layer 3 Managed Ethernet Switch
Hardware Specification
10/100Base-TX Ports 24 RJ-45 Auto-MDI/MDI-X ports 48 RJ-45 Auto-MDI/MDI-X ports
10/100/1000Base-T Ports 4 RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC slots 2 SFP interfaces ( Shared with Port-51 and Port-52 )
Switch Architecture Store-and-Forward
Switch Fabric 12.8Gbps Capacity 17.6Gbps Capacity
Switch throughput 9.52Mpps 13.0Mpps
Address Table 16K MAC address table with Auto learning function
Layer 3 Routing Table 2048 entries
Buffer Memory Up to 32Mbits for packet buffer
Flow Control Back pressure for Half-Duplex , IEEE 802.3x Pause Frame for Full-Duplex
LED Power, Link/Act,
Layer 2 function
Management Interface Console. Telnet, SSH, Web, SSL, SNMP
Port configuration
Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode selection. Flow
Control disable / enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto negotiation
status, trunk status.
VLAN IEEE 802.1Q Tagged Based VLAN ,up to 4041 VLAN groups
Port trunking Support 10 groups of 8-Port trunk
QoS Traffic classification based on Port Number, 802.1p priority, DS/TOS field in IP Packet
IGMP Snooping Allow to disable or enable.
IP Routing Protocol Static Route, RIPv1/v2, OSPFv2,IRDP, VRRP
Multicast Routing
Protocol
DVMRP, PIM-DM/SM
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE