PLANET WGS3-2820 - Manual (Page 452)

User’s Manual of WGS3-2820/WGS3-5220
452
12.6.4.1 no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system.
▫ Format no bootpdhcprelay minwaittime
▫ Mode Global Config
12.6.5 bootpdhcprelay serverip
This command configures the server IP Address for BootP/DHCP Relay on the system. The parameter is an IP
address in a 4-digit dotted decimal format.
▫ Default 0.0.0.0
▫ Format bootpdhcprelay serverip
▫ Mode Global Config
12.6.5.1 no bootpdhcprelay serverip
This command configures the default server IP Address for BootP/DHCP Relay on the system.
▫ Format no bootpdhcprelay serverip
▫ Mode Global Config
12.6.6 show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
▫ Format show bootpdhcprelay
▫ Modes Privileged EXEC
User EXEC
Maximum Hop Count Is the maximum allowable relay agent hops.
Minimum Wait Time
(Seconds)
Is the minimum wait time.
Admin Mode Represents whether relaying of requests is enabled or disabled.
Server IP Address Is the IP Address for the BootP/DHCP Relay server.
Circuit Id Option Mode Is the DHCP circuit Id option which may be enabled or disabled.
Requests Received Is the number or requests received.
Requests Relayed Is the number of requests relayed.
Packets Discarded Is the number of packets discarded.