PLANET WGS3-2820 User Manual
Page 73
User’s Manual of WGS3-2820/WGS3-5220
73
。
Total Packets Transmitted (Octets) -
The total number of octets of data (including those in bad packets)
transmitted on the network (excluding framing bits but including FCS octets). This object can be used as a
reasonable estimate of Ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets
objects should be sampled before and after a common interval.
。
Packets Transmitted 1523-2047 Octets -
The total number of packets (including bad packets) received that were
between 1523 and 2047 octets in length inclusive (excluding framing bits but including FCS octets).
。
Packets Transmitted 2048-4095 Octets -
The total number of packets (including bad packets) received that were
between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS octets).
。
Packets Transmitted 4096-9216 Octets -
The total number of packets (including bad packets) received that were
between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS octets).
。
Maximum Frame Size -
The maximum Ethernet frame size the interface supports or is configured, including
Ethernet header, CRC, and payload. (1518 to 1600). The default maximum frame size is 1518.
。
Total Packets Transmitted Successfully -
The number of frames that have been transmitted by this port to its
segment.
。
Unicast Packets Transmitted -
The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not sent.
。
Multicast Packets Transmitted -
The total number of packets that higher-level protocols requested be transmitted
to a Multicast address, including those that were discarded or not sent.
。
Broadcast Packets Transmitted -
The total number of packets that higher-level protocols requested be
transmitted to the Broadcast address, including those that were discarded or not sent.
。
Total Transmit Errors -
The sum of Single, Multiple, and Excessive Collisions.
。
Tx FCS Errors -
The total number of packets transmitted that had a length (excluding framing bits, but including
FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an
integral number of octets
。
Tx Oversized -
The total number of frames that exceeded the max permitted frame size. This counter has a max
increment rate of 815 counts per sec at 10 Mb/s.
。
Underrun Errors -
The total number of frames discarded because the transmit FIFO buffer became empty during
frame transmission.
。
Total Transmit Packets Discarded -
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
。
Single Collision Frames -
A count of the number of successfully transmitted frames on a particular interface for
which transmission is inhibited by exactly one collision.
。
Multiple Collision Frames -
A count of the number of successfully transmitted frames on a particular interface for
which transmission is inhibited by more than one collision.
。
Excessive Collision Frames -
A count of frames for which transmission on a particular interface fails due to
excessive collisions.
。
Port Membership Discards -
The number of frames discarded on egress for this port due to egress filtering being
enabled.
。
STP BPDUs Received -
Number of STP BPDUs received at the selected port.
。
STP BPDUs Transmitted -
Number of STP BPDUs transmitted from the selected port.