PLANET WGS3-2820 User Manual
Page 108
User’s Manual of WGS3-2820/WGS3-5220
108
4.3.3.3 Port Security Static
Figure 4-3-10
Port Security Statically Configured MAC Address
Port Security Statically Configured MAC Addresses
Selection Criteria
。
Unit/Slot/Port
- Select the physical interface for which you want to display data.
。
VLAN ID
- selects the VLAN ID corresponding to the MAC address being deleted.
Configurable data
。
MAC Address
- Accepts user input for the MAC address to be deleted.
Non-configurable data
。
MAC Address
- Displays the user specified statically locked MAC address.
。
VLAN ID
- Displays the VLAN ID corresponding to the MAC address.
。
Delete a Static MAC Address
- Deletes the MAC address from the Port-Security Static MAC address table.
。
VLAN ID
- Displays the VLAN ID corresponding to the MAC address to be deleted from the Static list.
Command Buttons
。
Submit
- Applies the new configuration and causes the changes to take effect. These changes will not be retained
across a power cycle unless a save configuration is performed.