PLANET XGSW-28040HP - Manual (Page 88)

Command Guide of XGSW-28040HP
cir Setup CIR
Committed Information Rate [kbps]
disable Disable policer
ebs Setup EBS for MEF policer
Excess Burst Size [bytes]
eir Setup EIR for MEF policer
Excess Information Rate [kbps]
enable Enable policer
mode Setup policer mode
aware Color-aware mode
blind Color-blind mode
coupled Coupling mode
rate-type Setup rate type
data Data rate policing
line Line rate policing
type Setup policer type
mef MEF ingress bandwidth profile
single Single bucket policer
Default:
N/A
Usage Guide:
To update a profile for EVC Policer (Ingress Bandwidth Profile).
Example:
To update EVC Policer (Ingress Bandwidth Profile) with EIR 1000 for policer 1
Switch# configure terminal
Switch (config)# evc policer update 1 eir 1000
4.2.56 evc update
Command:
evc update vid ivid interface ( * |
10GigabitEthernet | GigabitEthernet [ ] ) learning [ disable ] policer
{ | none | discard }
EVC identifier
vid Setup EVC VLAN ID
EVC VLAN ID
ivid Setup internal EVC VLAN ID
-88-