PLANET XGSW-28040HP - Manual (Page 227)

Command Guide of XGSW-28040HP
4.2.103.12 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (motd-banner) for vty 1
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# no motd-banner
4.2.103.13 privilege level
Command:
privilege level <0-15>
privilege Change privilege level for line
level Assign default privilege level for line
<0-15> Default privilege level for line
Default:
15
Usage Guide:
To configure privilege level
Example:
To configure privilege level (5) for vty 1.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# privilege level 5
-227-