PLANET XGSW-28040HP - Manual (Page 109)

Command Guide of XGSW-28040HP
4.2.65.29 gvrp join-request vlan(GG)
Command:
gvrp join-request vlan
gvrp Enable GVRP on port(s)
join-request Emit a Join-Request for test purpose
Default:
N/A
Usage Guide:
To send GVRP Join-Request to specific interface
Example:
To send GVRP Join-Request(VLAN 1) to GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # gvrp join-request vlan 1
4.2.65.30 gvrp leave-request vlan(GG)
Command:
gvrp leave-request vlan
gvrp Enable GVRP on port(s)
leave-request Emit a Leave-Request for test purpose
Default:
N/A
Usage Guide:
To send GVRP Leave-Request to specific interface
Example:
To send GVRP Leave-Request(VLAN 1) to GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # gvrp leave-request vlan 1
-109-