PLANET XGSW-28040HP - Manual (Page 412)

Command Guide of XGSW-28040HP
4.21.90 show snmp community v3
Command:
show snmp community v3 [ ]
show Show running system information
snmp Display SNMP configurations
community Community
v3 SNMPv3
Specify community name
Default:
N/A
Usage Guide:
To display the SNMPv3 Community information.
Example:
To display the SNMPv3 Community information
Switch # show snmp community v3
Community : public
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community : private
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
4.21.91 show snmp host
Command:
show snmp host [ ] [ system ] [ switch ] [ interface ] [ aaa ]
show Show running system information
snmp Display SNMP configurations
host Set SNMP host's configurations
Name of the host configuration
aaa AAA event group
interface Interface event group
switch Switch event group
system System event group
-412-