PLANET XGSW-28040HP - Manual (Page 219)

Command Guide of XGSW-28040HP
4.2.100 ipv6 mld unknown-flooding
Command:
ipv6 mld unknown-flooding
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
unknown-flooding Flooding unregistered IPv6 multicast traffic
Default:
Enabled
Usage Guide:
To flood unregistered IPv6 multicast traffic.
Example:
To flood unregistered IPv6 multicast traffic.
Switch# configure terminal
Switch (config)# ipv6 mld unknown-flooding
4.2.101 ipv6 route
Command:
Ipv6 route > {, interface vlan
}
ipv6 IPv6 configuration commands
route Add IP route
> IPv6 prefix x:x::y/z
IPv6 unicast address (except link-local address) of next-hop
interface Select an interface to configure
vlan VLAN Interface
VLAN identifier(s): VID
IPv6 link-local address of next-hop
Default:
None
Usage Guide:
To configure static route for IPv6
Example 1:
To configure static route as below table for IPv6.
-219-