PLANET XGSW-28040HP - Manual (Page 140)

Command Guide of XGSW-28040HP
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # pvlan 5
4.2.65.88 pvlan isolation
Command:
pvlan isolation
pvlan Private VLAN
isolation Port isolation
Default:
None
Usage Guide:
To enable PVLAN isolation for specific interface
Example:
To enable PVLAN isolation for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # pvlan isolation
4.2.65.89 qos cos
Command:
qos cos
qos Quality of Service
cos Class of service configuration
Specific class of service
Default:
0
Usage Guide:
To configure CoS of QoS for specific interface
Example:
To configure CoS (4) of QoS for GigabitEthernet X/X
-140-