PLANET XGSW-28040HP - Manual (Page 208)

Command Guide of XGSW-28040HP
4.2.86 ip name-server dhcp interface vlan
Command:
ip name-server dhcp interface vlan
ip Internet Protocol
name-server Domain Name System
dhcp Dynamic Host Configuration Protocol
vlan VLAN Interface
VLAN identifier(s): VID
Default:
None
Usage Guide:
To configure DNS IP address via specific VLAN DHCP Server.
Example:
To configure DNS IP address via specific VLAN 5 DHCP Server.
Switch# configure terminal
Switch (config)# ip name-server dhcp interface vlan 5
4.2.87 ip route
Command:
ip route
ip Internet Protocol
route Add IP route
Network
Netmask
Gateway
Default:
None
Usage Guide:
To configure static route
Example:
To configure static route as below table.
-208-